Plug your turntable's RCA leads into the or MM inputs on the back of the PP 2, depending on your cartridge type. Match the colors: Red for Right (R) and White for Left (L).
: Toggle the rear MM/MC switch to match the input you used. Nad Phono Preamp Pp2 Manual
The is a compact, low-noise device designed to add a turntable to modern amplifiers or receivers that only have "Line-Level" inputs (like CD, AUX, or Tuner). It supports both Moving Magnet (MM) and Moving Coil (MC) cartridges via separate inputs and a rear selector switch. 1. Setup & Installation Plug your turntable's RCA leads into the or
: Never connect the PP 2 to an input marked "PHONO" on your receiver, as this will cause severe distortion. The is a compact, low-noise device designed to
: Connect the external 24V power supply to the PP 2 and plug it into a wall outlet. A green LED on the front panel indicates the unit is powered. 2. Technical Specifications
Follow these steps to correctly integrate the PP 2 into your audio system:
: Check that all RCA plugs are fully inserted into their respective sockets on both the PP 2 and the amplifier.